Bottle, Coolant Recovery: Installation: Installation

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Coolant Recovery Bottle & Support Bolts

Courtesy of CHRYSLER GROUP, LLC

Align the coolant recovery bottle (2) to the radiator support and push the coolant recovery bottle (2) into place.
NOTE:
The lower support bolt is located under the lower active shutter seal. Image shown in illustration without the active shutter for clarity.
Install the coolant recovery bottle (2) to radiator support bolts (1 and 3). Tighten the bolts to 10 N.m (89 in. lbs.).
Connect the recovery hose to the radiator.
Install the front grille. Refer to GRILLE, INSTALLATION .
Fill the cooling system. Refer to STANDARD PROCEDURE .
Test the system for leaks. Refer to DIAGNOSIS AND TESTING .