LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 536 (Engine Cooling System - 1500) >> Accessory Drive >> TENSIONER, Belt >> Installation >> 3.0L - Diesel

3.0L - Diesel

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Belt Tensioner & Bolts
GC0158176Courtesy of CHRYSLER GROUP, LLC
  1. Install the belt tensioner (2). Tighten bolts (1) to 45 N.m (33 ft. lbs.).
  2. Install the serpentine belt. Refer to BELT, SERPENTINE, INSTALLATION .
  3. Check belt indexing marks (A).
  4. Install the electric vacuum pump. Refer to PUMP, ELECTRIC VACUUM, INSTALLATION .
  5. Install the pressurized coolant bottle. Refer to BOTTLE, PRESSURIZED COOLANT, INSTALLATION .
    Fig 2: Removing/Installing Engine Cover
    GC0158138Courtesy of CHRYSLER GROUP, LLC
  6. Install the engine cover (1).
  7. Connect the negative battery cable.
scientia non olet · About LEMON Manuals