LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 536 (Engine Cooling System - 1500) >> Accessory Drive >> Pulley, Idler >> Removal >> 3.0L - Left

3.0L - Left

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Idler Pulley & Bolt
GC0158185Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the negative battery cable.
  2. Remove the accessory drive belt. Refer to BELT, SERPENTINE, REMOVAL .
  3. Remove bolt (1) and the idler pulley (2).
scientia non olet · About LEMON Manuals