LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 535 (5.7L Engine (Service Information) 1500) >> Engine Block >> FLEXPLATE >> Removal >> Removal

Engine Block: FLEXPLATE: Removal: Removal

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Bolts, Clamping Ring, Friction Shim & Flex Plate
GC0154614Courtesy of CHRYSLER GROUP, LLC
NOTE:

A new clamping ring and bolts must be used anytime the flexplate or flywheel adapter is removed.

  1. On 4X4 models, remove the transfer case (Refer to appropriate TRANSFER CASE article ).
  2. Remove the transmission (Refer to appropriate AUTOMATIC TRANSMISSION article ).
  3. Paint mark the flex plate hub to flex plate relation.
  4. Remove bolts (1), clamping ring (2), friction shim (3), and the flex plate (4).
  5. Inspect flex plate for damage.
scientia non olet · About LEMON Manuals