LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 534 (3.0L Diesel (Service Information) 1500) >> Valve Timing >> Cover(S), Engine Timing >> Removal >> Lower Timing Chain Cover

Lower Timing Chain Cover

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the right and left upper timing chain cover. Refer to COVER(S), ENGINE TIMING, REMOVAL .
    Fig 1: Vibration Damper & Bolt
    GC0146664Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    The crankshaft damper bolt is a left hand thread.

  3. Remove the vibration damper (2). Refer to DAMPER, VIBRATION, REMOVAL .
  4. Remove the generator. Refer to GENERATOR, REMOVAL .
    Fig 2: Lower Timing Chain Cover & Bolts
    GC0146662Courtesy of CHRYSLER GROUP, LLC
  5. Remove the five oil pan-to-lower timing chain cover bolts.
  6. Remove bolts (1 and 3) and the lower timing chain cover (2).
scientia non olet · About LEMON Manuals