Sensor, Ambient Temperature: Removal: Removal
WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the negative battery cable.
- Using a flat blade screwdriver (3) or equivalent, insert blade into slot and gently pry upward to remove the panel (2) located below the left rear view mirror (1).
- Disconnect the sensor electrical connector (3) and remove sensor (2) from vehicle.
- Rotate the sensor one quarter turn counter clockwise to disengage the panel (4) from the retaining slot (1).