Link, Stabilizer Bar: Removal: Removal

WARNING: This page is about a different car, the 2014 RAM 1500. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

4X4 shown, 4x2 similar.

Fig 1: Identifying Stabilizer Bar, Grommets, Mounting Bolts, Retainers, And Bushings

Courtesy of CHRYSLER GROUP, LLC

NOTE:

It may be necessary to remove the other stabilizer link upper nut (4) in order to remove the link (5) being worked on from the vehicle.

Raise and support the vehicle.
Remove the lower nut (6).
Remove the upper nut, retainers and grommets (4).
Remove the stabilizer link (5) from the vehicle.