Diagnostic Test

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

CONTROL MODULE PROGRAMMING ERROR
NOTE:
Controller is programmed with generic software and will not allow the correct vehicle Powertrain management.
1. Record the controller part number.
2. Update the controller with the correct software in accordance with the Service Information.
  Verify that the controller updated successfully.
  
  Test Complete
  - Perform 40/41TE VERIFICATION TEST. Refer to 40/41TE TRANSMISSION VERIFICATION TEST .