LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 509 (3.6L - DTCS P0645 To P2138) >> Diagnosis And Testing >> P1697-EMR (Sri) Mileage Not Stored >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
  1. SRI MILEAGE NOT PROGRAMMED INTO THE PCM 
    1. Ignition on, engine not running.
    2. With the scan tool, attempt to program the SRI mileage into the PCM.
    3. With the scan tool, clear DTCs in the PCM.
    4. Start the engine.
    5. Allow the engine to reach normal operating temperature.
    6. With a scan tool, select View DTCs.

      Is the status Active for this DTC?

      Yes 

      • Replace and program the Powertrain Control Module in accordance with the Service Information.
      • Perform the PCM VERIFICATION Test. Refer to STANDARD PROCEDURE .

      No 

      • The SRI mileage has been successfully programmed into the PCM. Test is complete.
      • Perform the PCM VERIFICATION Test. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals