Diagnostic Test

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

SPEED CONTROL SWITCH STATUS
1. Turn the ignition on.
2. With the scan tool, select View DTCs. Copy DTC and Freeze Frame information.
3. Using the scan tool, monitor the Speed Control Switch status.
4. Press each button while noting the Speed Control Switch status for both switches on the scan tool.
  Did the Speed Control Switch 1 status and Speed Control Switch 2 status match when each button is pressed?
  
  Yes
  - Perform the INTERMITTENT CONDITION diagnostic procedure. Refer to STANDARD PROCEDURE .
  No
  - Replace the Speed Control Switch in accordance with the service information.
  - Perform the POWERTRAIN VERIFICATION TEST. Refer to STANDARD PROCEDURE .