LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 507 (3.6L - DTCS P0158 To P0457) >> Diagnosis And Testing >> P0455-EVAP Purge System Large Leak >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) activates the Evap Purge Solenoid to pull the Evaporative system into a vacuum to close the Evaporative System Integrity Monitor (ESIM) switch. Once the ESIM switch is closed, the PCM turns the Evap Purge solenoid off to seal the Evaporative System. If the ESIM switch reopens before the calibrated amount of time, a large leak error is detected. The test is designed to discover a 0.090" leak or greater. Two Trip Fault. Three good trips to turn off the MIL.

scientia non olet · About LEMON Manuals