LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 507 (3.6L - DTCS P0158 To P0457) >> Diagnosis And Testing >> P0325-Knock Sensor 1 Circuit >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) detects that the Knock Sensor input voltage is:

above 4.0 volts

less than or equal to 1.0 volt with engine RPM at or above 2200

equal to 0.0 volts with engine RPM below 2200

scientia non olet · About LEMON Manuals