Diagnostic Test

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

ACTIVE DTC
NOTE:
For vehicle communication problems, use the scan tool to refer to the Network Review Screen. The screen depicts a high level view of the vehicle network. Fault and problem areas appear in red. Selecting any of the network components allows access to the source of the problem.
1. Ignition on, engine not running.
2. With a scan tool, select View DTCs.
  Is the status Active for this DTC?
  
  Yes
  - Refer to DIAGNOSIS AND TESTING and perform the U0141-Lost Communication with IPM (FCM/TIPM) diagnostic procedure.
  No
  - Perform the CHECKING FOR AN INTERMITTENT DTC diagnostic procedure. Refer to STANDARD PROCEDURE .
  - Perform the PCM VERIFICATION Test. Refer to STANDARD PROCEDURE .