Diagnostic Test

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

DELETE FOBIKS AND REPROGRAM
1. With the scan tool, use the "Erase All Ignition Keys" feature under Miscellaneous Functions to delete all stored FOBIKs.
2. With the scan tool, use the "Program Ignition Keys or Key FOBs" feature under Miscellaneous Functions to reprogram all applicable FOBIKs.
3. With the scan tool, erase the WIN DTCs.
4. Turn the ignition off, wait 15 seconds, turn the ignition on.
5. Wait one minute, and read the active DTCs.
  Does the scan tool display; B1A27-SKREEM PROGRAMMING PERFORMANCE?
  
  Yes
  - Replace the Wireless Ignition Node (WIN) in accordance with the Service Information. Refer to RECEIVER, Wireless Ignition Node , Removal .
  - Perform the WIN VERIFICATION TEST. Refer to Standard Procedure .
  No
  - Repair is complete.
  - Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST for 1500, 2500 & 3500, or BODY VERIFICATION TEST for 3500 CAB & CHASSIS, 4500 & 5500 .