LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Wireless Ignition Node (Win) - Electrical Diagnostics) >> Diagnosis and Testing >> B1A08-RKE Fob 1 Performance >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. TEST FOR INTERMITTENT CONDITION 
    1. Put the FOBIK in the ignition and turn the ignition on.
    2. With the scan tool, record and erase DTCs.
    3. Turn the ignition off and operate the FOBIK in all positions several times.
    4. With the scan tool, read the DTCs.

      Does the scan tool display this DTC as active?

      Yes 

      No 

      • The conditions that caused this code to set are not present at this time. Inform the owner of the most probable cause for this code to set and therefore causes the RKE system to be inoperative.
      • Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST for 1500, 2500 & 3500, or BODY VERIFICATION TEST for 3500 CAB & CHASSIS, 4500 & 5500 .