LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 499 (2.4L - DTCS P000A To P0303) >> Diagnosis And Testing >> P0135-O2 Sensor 1/1 Heater Performance >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

The Powertrain Control Module (PCM) detects no O2 sensor output when the heater is powered up. Two trip fault. Three good trips to turn off the MIL.