A/C Cooldown Test
WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
The A/C Cool down Test:
- is actuated with a scan tool.
- tests A/C system performance based on evaporator temperature sensor input.
- will fail if evaporator starting temperature is below 18° C (65° F) when initiating the test.
- will pass if the evaporator temperature drops 11° C (20° F).
- indicates test outcome by displaying one or more test status messages on the scan tool. These messages will clear after paging back out of this test function. Therefore, is it important to note all of the messages before doing so.
- will cause the A/C status indicator to flash while the test is running.