LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 493 ((Heating & Air Conditioning (MTC) - Electrical Diagnostics)) >> DTC Troubleshooting >> B1030-12-Evaporator Temperature Sensor - Circuit Short To Battery >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

The Evaporator Temperature Sensor voltage input to the A/C Heater Control is equal to or above 4.8 volts for a continuous period of two seconds. If the A/C Heater Control detects a valid voltage, the DTC will change from Active to Stored and will stay in the controllers memory for 100 ignition cycles.