Diagnostic Test
WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
- REPLACE THE TOTALLY INTEGRATED POWER MODULE IF DTC IS ACTIVE
- Using the scan tool, read the active TIPM DTCs.
Does the scan tool display this DTC as active?
Yes
- Replace and program the Totally Integrated Power Module in accordance with the Service Information.
- Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .
No
- If the DTC is stored, check for an intermittent condition. Visually inspect the related wiring harness connectors. Look for broken, bent, pushed out or corroded terminals.
- Perform the BODY VERIFICATION TEST. Refer to STANDARD PROCEDURE .
- Using the scan tool, read the active TIPM DTCs.