LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 488 ((Totally Integrated Power Module (TIPM) - Electrical Diagnostics)) >> DTC Troubleshooting >> B2206-Current VIN Missing/Mismatch >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

The Totally Integrated Power Module (TIPM) will set this code if the Vehicle Identification Number (VIN) stored in the TIPM does not match the VIN message on the CAN C Bus.

scientia non olet · About LEMON Manuals