LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 486 (62TE Automatic Transmission (Service Information)) >> Seal, Differential >> Installation >> Right

Seal, Differential: Installation: Right

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Differential Output Bearing Cover & Bolts
GC0122542Courtesy of CHRYSLER GROUP, LLC
  1. Clean the transaxle case and apply MOPAR® ATF RTV (MS-GF41).
  2. Position the transmission extension assembly (2), install the bolts (1) and tighten to 12 N.m (105 in. lbs.).
  3. Install axle shaft. Refer to INSTALLATION .
  4. Check transaxle fluid level and adjust as necessary. Refer to FLUID, STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals