Coil, Ignition: Removal: 2.4L

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Ignition Coils

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Prior to removing the coil, spray compressed air around coil top to make sure no dirt drops into the spark plug tube.

The electronic ignition coil attaches directly to the valve cover.

Remove and isolate the negative battery cable.
Disconnect the electrical connector from the ignition coil.

Fig 2: Ignition Coil Bolt
Courtesy of CHRYSLER GROUP, LLC
Remove the ignition coil mounting bolts.

Fig 3: Ignition Coil Removed
Courtesy of CHRYSLER GROUP, LLC
Remove the ignition coil.