LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 474 (Ignition System (Service Information)) >> Coil, Ignition >> Installation >> 2.4L

Coil, Ignition: Installation: 2.4L

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Ignition Coil Removed
GC0082371Courtesy of CHRYSLER GROUP, LLC
  1. Install the ignition coil.
    Fig 2: Ignition Coil Bolt
    GC0082370Courtesy of CHRYSLER GROUP, LLC
  2. Install the bolt and tighten to 9 N.m (79.5 in. lbs.).
  3. Connect and lock the electrical connectors.
  4. Install the negative battery cable and tighten nut to 5 N.m (45 in. lbs.).
scientia non olet · About LEMON Manuals