LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 473 (Horn System (Service Information)) >> Horn >> Removal >> Removal

Section 473 (Horn System (Service Information)): Horn: Removal: Removal

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative cable from the battery.
  2. Remove the front lower fascia closeout. Refer to FASCIA, FRONT LOWER, CLOSEOUT, REMOVAL .
  3. Disconnect the horn electrical connector.
  4. Remove the horn mounting fastener.
  5. Remove the horn.
scientia non olet · About LEMON Manuals