Learn The 1ST 2-3 Shift After A Restart Or Shift To Reverse
WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Use the following steps to have the TCM learn the 1st 2-3 shift OD CVI.
NOTE:
The transmission oil temperature must be above 80°F (27°C).
- With the vehicle engine running, select reverse gear for over 2 seconds.
- Shift the transmission to Drive and accelerate the vehicle from a stop at a steady 15 degree throttle opening and perform a 2-3 shift while noting the 1st 2-3 OD CVI.
- Repeat until the 1st 2-3 upshift becomes smooth and the 1st 2-3 OD CVI stabilizes. Refer to step 1 and step 2.