LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (545RFE Automatic Transmission (Service Information)) >> Diagnosis and Testing >> Hydraulic Pressure Test >> Notes

Hydraulic Pressure Test: Notes

WARNING: This page is about a different car, the 2011 RAM Pickup and 2011 RAM Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

An accurate tachometer and pressure test gauges are required. Test Gauge (special tool #C-3293-SP, Gauge, Pressure 0-300 P.S.I.) has a 300 psi range and is used at all locations where pressures exceed 100 psi.

scientia non olet · About LEMON Manuals