LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 457 (Restraints System (Service Information)) >> Buckle, Seat Belt >> Installation >> Front

Buckle, Seat Belt: Installation: Front

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Driver Front Seat Belt Buckle
GC0122052Courtesy of CHRYSLER GROUP, LLC
  1. Position the buckle (1) on the seat cushion frame (2).
  2. Install the retaining bolt and tighten to 100 N.m (74 ft. lbs.).
  3. Install the cushion side shield. Refer to SIDE SHIELDS, SEAT CUSHION, FRONT, INSTALLATION , Sedan or SIDE SHIELDS, SEAT CUSHION, FRONT, INSTALLATION , Convertible.
  4. Install the front seat. Refer to SEAT, INSTALLATION , Sedan or SEAT, FRONT, INSTALLATION , Convertible.
scientia non olet · About LEMON Manuals