LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 456 (Antilock Brake System (Abs) - Electrical Diagnostics) >> DTC Troubleshooting >> C121D-Brake Pressure Sensor Circuit >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

When the Anti-Lock Brake Module indicates that the Brake Pressure Sensor Signal is out of range.

scientia non olet · About LEMON Manuals