LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 454 (Rear Suspension) >> Link, Toe >> Removal >> Removal

Link, Toe: Removal: Removal

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    Fig 1: Identifying Toe Link
    GC0122190Courtesy of CHRYSLER GROUP, LLC
  2. Remove the mounting bolt (2) and nut securing the toe link (3) to the knuckle.
    Fig 2: Identifying Rear Toe Adjustment Cam Bolt
    GC0120791Courtesy of CHRYSLER GROUP, LLC
  3. Mark the position of the cam bolt cam on the crossmember using a paint marker or crayon. Do not use any type marker that will scratch or damage the surface of the crossmember.
  4. While holding the cam bolt (4) head stationary, loosen and remove the toe link mounting cam bolt nut (3) and washer (1). Remove the cam bolt.
  5. Remove the toe link (2).
scientia non olet · About LEMON Manuals