LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 453 (Engine Cooling System) >> Engine >> Bottle, Coolant Recovery >> Removal >> Pressure System

Pressure System

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Coolant Recovery Container - Pressure System
GC0120878Courtesy of CHRYSLER GROUP, LLC
  1. Drain coolant below the coolant recovery container level. Refer to STANDARD PROCEDURE .
  2. Remove the power steering reservoir attaching screw.
  3. Disconnect the return hose (2) from coolant recover container (4).
  4. Remove coolant recovery container mounting bolts (1).
  5. Disconnect hose (3) from the bottom of the coolant recovery container (4).
  6. Remove coolant recovery container (4).
scientia non olet · About LEMON Manuals