Non-Pressure System
WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - BOLT |
| 2 - RADIATOR NIPPLE |
| 3 - HOSE |
| 4 - COOLANT RECOVERY CONTAINER - NON-PRESSURE |
- Connect the overflow hose (4) to the radiator nipple (2).
- Install container in mounting position and install mounting bolts (1).
- Tighten mounting bolts to 10 N.m (89 in. lbs.).
- Fill cooling system. Refer to STANDARD PROCEDURE .