LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 453 (Engine Cooling System) >> Accessory Drive >> TENSIONER, Belt >> Removal >> 3.6L

TENSIONER, Belt: Removal: 3.6L

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Measurement A
GC0144244Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the negative battery cable.
  2. Remove the air intake system. Refer to BODY, AIR CLEANER, REMOVAL for 2.4L or BODY, AIR CLEANER, REMOVAL for 3.6L.
  3. Remove main drive belt. Refer to BELT, SERPENTINE, REMOVAL .
  4. Remove tensioner assembly from engine front cover.
WARNING:

Because of high spring tension, do not attempt to disassemble automatic tensioner. Unit is serviced as an assembly (except for pulley on tensioner).

scientia non olet · About LEMON Manuals