LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 452 (Body - Interior & Exterior) >> Interior >> Panel, Quarter Trim >> Removal >> Convertible

Panel, Quarter Trim: Removal: Convertible

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Armrest
GC0123004Courtesy of CHRYSLER GROUP, LLC
  1. Place the convertible top in the full open position. Ensure the top is completely stowed into the trunk area.
  2. Using a trim stick or equivalent, pry the rear shelf trim.
  3. Remove the rear seat cushion. Refer to COVER, SEAT CUSHION, REMOVAL  or COVER, SEAT CUSHION, REMOVAL .
  4. Remove rear seat back. Refer to SEAT BACK, REMOVAL .
  5. Using a trim stick or equivalent, pry up on the armrest/cup holder and remove from the quarter trim panel.
    Fig 2: Armrest Fastener
    GC0123005Courtesy of CHRYSLER GROUP, LLC
  6. Remove the one screw (1) from the quarter trim panel.
    Fig 3: Quarter Trim Panel
    GC0123006Courtesy of CHRYSLER GROUP, LLC
  7. Using a trim stick or equivalent, gently pry out on the quarter trim panel (1) and remove from vehicle.
scientia non olet · About LEMON Manuals