Removal - Avenger

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Center Bezel Hood

Courtesy of CHRYSLER GROUP, LLC

Disconnect the negative battery cable.
Using trim stick (special tool #C-4755, Trim Stick) or equivalent, pull upward to disengage the retaining clips and remove the center bezel hood (1).

Fig 2: Center Trim Bezel - Avenger
Courtesy of CHRYSLER GROUP, LLC
Using trim stick (special tool #C-4755, Trim Stick) or equivalent, disengage the retaining clips, disconnect and remove the center trim bezel (1).