LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 452 (Body - Interior & Exterior) >> Convertible Top, Retractable Hard Top Unique Components >> Capture System, Front Panel Down >> Removal >> Center Down Capture

Center Down Capture

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Center Rail, Clip & Down Capture Assembly
GC0122893Courtesy of CHRYSLER GROUP, LLC
  1. Remove the mid/rear headliner. Refer to HEADLINER, REMOVAL  - CONVERTIBLE TOP, CONVERTIBLE SOFT TOP UNIQUE COMPONENTS or HEADLINER, REMOVAL  - CONVERTIBLE TOP, RETRACTABLE HARD TOP UNIQUE COMPONENTS.
  2. Remove the center rail trim by removing the two lower pushpins then carefully pulling the trim away from the center rail (2).
  3. Remove the clip (3) from the pin at the bottom of the down capture assembly (4).
  4. Remove the screw securing the top of the assembly to the center rail.
  5. Remove the assembly from the convertible top.
scientia non olet · About LEMON Manuals