LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 452 (Body - Interior & Exterior) >> Convertible Top, CST And RHT Common Components >> Adjustments >> DECKLID Alignment >> DECKBAR Rear Hinges

DECKBAR Rear Hinges

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Deckbar Rear Hinges
GC0122833Courtesy of CHRYSLER GROUP, LLC

The deckbar rear hinges (2) adjusts the rear decklid cross car fit. Adjusting the hinges left or right will cause the rear of the decklid to move cross car.

  1. Loosen the fasteners on the hinges.
  2. Adjust the deckbar hinges left or right as necessary.
  3. Tighten the mounting fasteners.
  4. Close the decklid and verify proper adjustment.