Fog Lamp Alignment

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

A properly aimed front fog lamp will project a pattern on the alignment screen 100 millimeters (4 inches) below the fog lamp centerline and straight ahead of the lamp for domestic market vehicles.

Fig 1: Vertical Adjustment Screw, Front Fog Lamp & Front Fascia

Courtesy of CHRYSLER GROUP, LLC

Turn the fog lamps ON.
Insert a screwdriver through the clearance hole in the underside of the front fascia (3) closure panel below each fog lamp (2) to rotate the vertical adjustment screw (1) on each lamp to adjust the beam height as required.