LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 449 (Heating & Air Conditioning (Service Information)) >> Distribution >> Outlet, Air >> Installation >> Demister

Outlet, Air: Installation: Demister

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Take the proper precautions to protect the instrument panel cover from cosmetic damage while performing this procedure.

NOTE:

Right side shown in illustration. Left side similar.

Fig 1: Instrument Panel Cover, Screw & Demister Outlet
GC0147070Courtesy of CHRYSLER GROUP, LLC
  1. Position the demister duct (1) to the instrument panel cover (2).
  2. Install the screw (3) that secures the demister duct to the instrument panel cover. Tighten the screw to 2.2 N.m (20 in. lbs.).
  3. Install the instrument panel cover. Refer to PANEL, INSTRUMENT, INSTALLATION .
scientia non olet · About LEMON Manuals