LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 446 (Frame And Bumpers) >> Bumpers >> Fascia, Rear >> Removal >> SEBRING Sedan

SEBRING Sedan

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Fascia Push-In Fasteners
GC0122080Courtesy of CHRYSLER GROUP, LLC
  1. Release decklid latch and open decklid.
  2. Remove three push-in fasteners (1) attaching center of fascia to rear closure panel.
    Fig 2: Splash Shield Fasteners
    GC0122081Courtesy of CHRYSLER GROUP, LLC
  3. Remove two wheelhouse fasteners and pull back splash shields exposing fascia to fender hidden fastener (1).
    Fig 3: Lower Fascia Fasteners
    GC0122082Courtesy of CHRYSLER GROUP, LLC
  4. Remove lower fascia fasteners (2).
  5. Slide fascia rearward to disengage hooks holding fascia to bottom of quarter panel.
  6. Remove fascia from vehicle.
scientia non olet · About LEMON Manuals