LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 445 (3.6L Engine (Service Information)) >> Air Intake System >> Body, Air Cleaner >> Removal >> Removal

Body, Air Cleaner: Removal: Removal

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Engine Cover
GC0147054Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the engine cover (1).
    Fig 2: Fresh Air Makeup Hose, Air Cleaner Body, Push Pin, Two Bolts & Clamp
    GC0147055Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the fresh air makeup hose (4) from the air cleaner body (1).
  4. Remove the push pin (3).
  5. Remove two bolts (2) from the air cleaner body (1).
  6. Loosen the clamp (5) at the resonator and remove the air cleaner body (1).
scientia non olet · About LEMON Manuals