LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 445 (3.6L Engine (Service Information)) >> Air Intake System >> Body, Air Cleaner >> Installation >> Installation

Body, Air Cleaner: Installation: Installation

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fresh Air Makeup Hose, Air Cleaner Body, Push Pin, Two Bolts & Clamp
GC0147055Courtesy of CHRYSLER GROUP, LLC
  1. Engage the air inlet hose to the resonator and install the air cleaner body (1) with two bolts (2) tightened to 9 N.m (80 in. lbs.).
  2. Tighten the air inlet hose to resonator clamp (5) to 4 N.m (35 in. lbs.).
  3. Install the push pin (3).
  4. Install the fresh air makeup hose (4) to the air cleaner body.
    Fig 2: Engine Cover
    GC0147054Courtesy of CHRYSLER GROUP, LLC
  5. Install the engine cover (1).
  6. Connect the negative battery cable and tighten nut to 5 N.m (45 in. lbs.).
scientia non olet · About LEMON Manuals