LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 444 (2.4L Engine (Service Information)) >> Cylinder Head >> Camshaft, Engine >> Standard Procedure >> Standard Procedure - Measuring Camshaft End Play

Standard Procedure - Measuring Camshaft End Play

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Measuring Camshaft End Play
GC0121429Courtesy of CHRYSLER GROUP, LLC
  1. Using a suitable tool, move camshaft as far rearward as it will go.
  2. Zero dial indicator.
  3. Move camshaft as far forward as it will go.
  4. Record reading on dial indicator. For end play specification, refer to SPECIFICATIONS .
  5. If end play is excessive, check cylinder head and camshaft for wear; replace as necessary.
scientia non olet · About LEMON Manuals