LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 444 (2.4L Engine (Service Information)) >> Cylinder Head >> Bucket, Tappet >> Standard Procedure >> Standard Procedure - Measuring Valve Lash >> Clearance Too Large

Clearance Too Large

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Tappet Identification
GC0082431Courtesy of CHRYSLER GROUP, LLC
  1. Remove camshafts . Refer to CAMSHAFT, ENGINE, REMOVAL .
  2. Clearance - specification = change.
  3. Increase tappet thickness by change figure.
  4. Install camshafts Refer to CAMSHAFT, ENGINE, INSTALLATION .
  5. Verify that valve lash is correct.
scientia non olet · About LEMON Manuals