LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 441 (Vehicle Quick Reference) >> Towing >> Standard Procedure >> Standard Procedure - Vehicle Towing >> Recommended Towing Equipment

Recommended Towing Equipment

WARNING: This page is about a different car, the 2013 Dodge Avenger and 2013 Chrysler 200. However, it is still accessible from the selected car via links, so may be relevant.

To avoid damage to bumper fascia and air dams use of a flat bed towing device or wheel lift is recommended. When using a wheel lift towing device, be sure the unlifted end of disabled vehicle has at least 100 mm (4 in.) ground clearance. If minimum ground clearance cannot be reached, use a towing dolly. If a flat bed device is used, the approach angle should not exceed 15 degrees.

Fig 1: Recommended Towing Equipment
GC0120809Courtesy of CHRYSLER GROUP, LLC
1 - WHEEL LIFT
2 - FLAT BED