LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 434 (6.7L Diesel - DTCS P0420 To P1208 - 2500 Hd & 3500 Hd) >> Diagnosis And Testing >> P060C-Internal Control Module Main Processor Performance >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The PCM detects Battery voltage lower than a calibrated threshold for a pre-determined amount of time. Battery voltage was removed from the PCM while it was powered on. This could be during engine operation, or after key off while the PCM was powering down. The power down phase can last up to 10 minutes.

scientia non olet · About LEMON Manuals