LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 433 (6.7L Diesel - DTCS P0008 To P040D - 2500 Hd & 3500 Hd) >> Diagnosis And Testing >> P0381-Wait To Start Lamp Inoperative >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The cluster sends a signal to the Powertrain Control Module (PCM) that it has detected a failed wait to start lamp on two consecutive drive cycles.

scientia non olet · About LEMON Manuals