LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 433 (6.7L Diesel - DTCS P0008 To P040D - 2500 Hd & 3500 Hd) >> Diagnosis And Testing >> P0381-Wait To Start Lamp Inoperative >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
FUSED IGNITION SWITCH OUTPUT CIRCUIT OPEN/HIGH RESISTANCE
WAIT-TO-START LIGHT BULB
WIRING/CONNECTOR PROBLEM

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to STANDARD PROCEDURE .

scientia non olet · About LEMON Manuals