LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 431 (Powertrain Control Module (Pcm) - Electrical Diagnostics - 68RFE Automatic Transmission - 2500 Hd & 3500) >> Diagnosis And Testing >> P0845-2C Hydraulic Pressure Test >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

After a shift into a forward gear, with engine speed above 1000 RPM, the Powertrain Control Module (PCM) momentarily turns on element pressure to the Clutch circuits that don't have pressure to identify the correct Pressure Switch closes. If the Pressure Switch does not close two times, the DTC sets.

scientia non olet · About LEMON Manuals