LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 430 (Powertrain Control Module (Pcm) - Electrical Diagnostics - 66RFE Automatic Transmission - 2500 Hd & 3500) >> Diagnosis And Testing >> U0140-Lost Communication With Body Control Module >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The module has not received a Body Control Module (BCM) Bus message over the CAN C bus for approximately two to five seconds. The circuit is continuously monitored. One trip fault. If the vehicle is equipped with the stop/start feature, the system will be disabled when this DTC is active.