LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 430 (Powertrain Control Module (Pcm) - Electrical Diagnostics - 66RFE Automatic Transmission - 2500 Hd & 3500) >> Diagnosis And Testing >> P0740-TCC Out Of Range >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2013 RAM 3500 HD and 2013 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Transmission must be in EMCC with input speed greater than 1750 rpm. The L/R-TCC Solenoid achieves the maximum duty cycle and can not pull engine speed within 60 rpm of input speed. Also when the transmission is in FEMCC and the engine slips TCC more than 100 rpm for 10 seconds then DTC P0740 will set. This DTC can take up to five minutes of problem identification before illuminating the MIL.

scientia non olet · About LEMON Manuals